Categories How-To Guides

Printer Not Connecting to WiFi? 7 Fixes That Work

A printer that will not connect to WiFi is one of the most annoying home tech problems. The printer looks fine, the router looks fine, yet nothing prints. The good news is that the printer is rarely broken. In most cases the printer and the router simply disagree about something: which WiFi band to use, which password to accept, or which address the printer lives at. Work through the fixes below in order. Most people are printing again by fix three or four.

1. Run the Quick Checks First

Start with the simple things, because they fix a surprising number of cases.

First, check that the printer and your computer are on the same network. A printer on the guest network cannot be seen by a computer on the main network. Move both to the same WiFi name.

Second, check the distance. Walls and floors weaken WiFi fast. Move the printer closer to the router for the test, even if only for a few minutes. If it connects close up, the signal was too weak where it normally sits.

Third, check the WiFi password. Passwords are case sensitive, and a single wrong character fails the connection with no helpful message. Retype it slowly, and check for a space at the end if you pasted it in.

Fourth, look at the printer screen for an error code or a message such as “incorrect password” or “network not found”. That message tells you which fix to try next.

2. Check the 2.4 GHz Band

This is the single most common cause. Most home printers only support the 2.4 GHz band. They cannot see or join a 5 GHz network at all.

Many modern routers combine both bands under one network name. This feature is called Smart Connect or band steering. A printer that only works on 2.4 GHz can struggle with a combined name, and may connect and then keep dropping off.

Open your router settings or app and check the bands. If you see two names, connect the printer to the one without “5G” in its name. If you see only one name, turn off band steering or Smart Connect so each band gets its own name, then connect the printer to the 2.4 GHz one. Some routers also let you create a separate 2.4 GHz only network for devices like printers.

Your computer and phone can stay on 5 GHz. As long as everything uses the same router, they can still find the printer.

3. Restart Everything in the Right Order

A proper restart clears stuck network settings and makes the router hand out a fresh address. The order matters, so follow it exactly.

  1. Turn off the printer and unplug its power cable.
  2. Unplug the router, and the modem too if it is a separate box.
  3. Wait a full 60 seconds.
  4. Plug the modem back in first, then the router. Wait until the internet light is steady and your phone is back online. Give this two to three minutes.
  5. Plug the printer back in and turn it on. Give it a minute to finish warming up.
  6. Restart your computer, then try to print.

Do not rush step four. A router that is still starting up cannot hand the printer a proper address, and the printer will fail again.

4. Re-Run the WiFi Setup on the Printer

If the printer still will not connect, remove the old saved network and set it up again from scratch. Old saved settings are a common cause, especially if you changed your router, your WiFi password, or your broadband provider.

On the printer control panel, open the wireless or network settings, choose the option to forget the network or restore network settings, then run the wireless setup wizard. Pick your 2.4 GHz network name from the list and enter the password carefully.

If your printer and router both have a WPS button, you can use that instead. Press the WPS button on the printer, then press the WPS button on the router within two minutes. The two devices connect automatically, with no password to type. Note that WPS usually only works on 2.4 GHz networks.

After the wizard finishes, print a network status page from the printer menu. It shows whether the printer is connected and what IP address it received. An address starting with 169.254 means the printer never got a working address from the router, so move on to the router fixes below.

5. Update the Printer Driver and Firmware

Outdated software causes more printer problems than most people expect. A driver written for an older version of Windows can fail silently after an update, and old printer firmware may not understand newer router security settings.

On your computer, go to the printer maker’s official support site, enter your exact printer model, and download the latest driver. Install it, then remove the old printer from your computer and add it again fresh. On Windows, this is in Settings, then Bluetooth and devices, then Printers and scanners. On a Mac, it is in System Settings, then Printers and Scanners.

For a safe, step by step approach to drivers in general, see our guide on how to update drivers safely on Windows 11.

While you are there, check for a firmware update for the printer itself. Many printers can update from their own settings menu, or through the maker’s app such as HP Smart. Firmware updates often fix WiFi dropouts directly, so this step is worth the few minutes it takes.

6. Fix the Router Settings That Block Printers

If the printer finds your network but still will not stay connected, the router settings are the likely cause.

Check the WiFi security mode first. Many older printers do not understand WPA3 only mode. In your router settings, switch the security to WPA2, or to WPA2/WPA3 mixed mode if that option exists. Also make sure the router is not set to hide the network name, because some printers cannot join a hidden network.

Next, check for MAC address filtering. With this feature on, the router only allows devices on an approved list, and a new printer will not be on it. Either turn filtering off or add the printer MAC address to the list. You can find the MAC address on the printer network status page.

Finally, check that DHCP is turned on. DHCP is the router feature that hands out IP addresses. If it is off, the printer gets no address and cannot talk to anything on the network.

If you are unsure about any of these settings, our guide on how to secure your home WiFi explains the router settings page and the security options in plain terms.

7. Give the Printer a Static IP Address

This fix solves the classic “it worked yesterday” problem. The printer is still on WiFi, but after a router restart it received a new IP address. Your computer keeps sending jobs to the old address, so the printer shows as offline even though nothing is wrong with it.

A static IP, also called a DHCP reservation, locks one address to your printer permanently. Here is how to set it up.

  1. Find the printer current IP address and MAC address on its network status page.
  2. Log in to your router admin page, usually at 192.168.0.1 or 192.168.1.1 in a browser.
  3. Open the LAN or DHCP reservation section.
  4. Add the printer MAC address and assign it the same IP address permanently.
  5. Restart the printer, then remove and re-add it on your computer using the new fixed address.

Once this is done, the address never changes again, and the “printer offline” problem should not come back after router restarts.

When to Reset the Printer

If none of the fixes above worked, reset the printer network settings to factory defaults and run the setup wizard again from the start. This clears any corrupt saved settings. Only do a full factory reset of the whole printer as a last resort, because it also clears other settings such as paper size and print quality.

If the printer still cannot see any network after a reset, and other devices connect fine in the same spot, the printer WiFi hardware may have failed. At that point, a USB cable connection or a repair quote is the practical next step.

FAQs

Why does my printer keep disconnecting from WiFi?

The most common reasons are band steering on a combined 2.4 GHz and 5 GHz network, a changing IP address after router restarts, and power saving or sleep modes on the printer. Turn off band steering, give the printer a static IP address, and turn off deep sleep in the printer settings.

Why can my printer see the WiFi network but not connect?

This usually means the password is wrong, or the router security mode is one the printer does not support. Retype the password slowly, then switch the router from WPA3 only to WPA2 or WPA2/WPA3 mixed mode and try again.

Should my printer use 2.4 GHz or 5 GHz WiFi?

Use 2.4 GHz unless your printer manual clearly says it supports 5 GHz. Most home printers only work on 2.4 GHz. The 2.4 GHz band also travels further through walls, which helps if the printer sits in another room from the router.

Why does my computer say the printer is offline when it is on?

Your computer is usually sending jobs to an old IP address. The printer got a new address after a router restart. Give the printer a static IP address in the router settings, then remove and re-add the printer on your computer.

Can I connect my printer with a cable instead?

Yes. A USB cable connection works fine and avoids WiFi entirely. You can also plug the printer into the router with an Ethernet cable if it has a network port, which is a reliable option for a printer that stays in one place.

Conclusion

A printer that will not connect to WiFi is frustrating, but it is almost always fixable at home. Check the 2.4 GHz band first, restart everything in the right order, then re-run the WiFi setup and update the driver and firmware. If the problem keeps coming back, a static IP address is the lasting fix. Work through the steps in order, test after each one, and stop as soon as printing works again.